LAIRD TECHNOLOGIES S9028PCLJ Rfmax Lhcp Rfid Antenna Fcc Etsi S8658PLJ

( Brand: Laird Technologies ), ( Model: RFMAX S9028PCLJ ), ( Part Type: Antenna ), ( Country/region Of Manufacture: China ), ( Device Function: Rfid Antenna )

Review LAIRD TECHNOLOGIES Rfmax Lhcp Indoor Rfid Antenna Fcc etsi

The S9028PCLJ RFMax S8658PLJ LHCP RFID Antenna is a high-performance solution for RFID applications, designed to meet the requirements of both FCC and ETSi standards, as well as Laird compliance. This antenna is equipped with an S8658PLJ chip, which is renowned for its excellent performance in various RFID systems.

The S9028PCLJ RFID Antenna features a Left-Hand Circular Polarization (LHCP) design, ensuring reliable communication even in challenging RF environments. This polarization minimizes the impact of multipath effects and provides improved read range and accuracy. The antenna is also designed with a 50 Ohm impedance, making it compatible with a wide range of RFID readers.

The S9028PCLJ RFID Antenna is a compact and lightweight device, measuring just 80mm in length and 25mm in width, making it easy to integrate into various RFID applications. The antenna is also weather-resistant, with an IP67 rating, ensuring it can withstand harsh environmental conditions.

The S9028PCLJ RFID Antenna is a versatile solution, suitable for a wide range of RFID applications, including asset tracking, inventory management, and access control. It operates in the UHF frequency band, providing a high read range and fast data transfer rates. The antenna is also designed to work with various RFID tags, including passive and active tags.

In summary, the S9028PCLJ RFMax S8658PLJ LHCP RFID Antenna is a high-performance, weather-resistant, and versatile solution for RFID applications. Its LHCP design, S8658PLJ chip, and 50 Ohm impedance ensure reliable communication and compatibility with various RFID readers. Its compact size and IP67 rating make it easy to integrate into various applications, while its wide frequency band and compatibility with various RFID tags make it a versatile solution for various RFID applications.

1. Compliance with FCC, ETS, and Laird standards, ensuring it meets regulatory requirements for RFID usage in various regions.

2. LHCP (Left-Hand Circular Polarization) design, which can enhance performance in challenging RF environments and increase the range of RFID systems.

3. Utilizes the S8658PLJ chipset, which is known for its high-performance capabilities and reliability.

4. Suitable for various applications, such as inventory management, asset tracking, and access control, due to its wide operating frequency range (125 kHz to 13.56 MHz).

1. Limited availability and potential higher cost compared to other RFID antennas due to its specific features and high-performance capabilities.

2. Requires proper setup and configuration to achieve optimal performance, which may require technical expertise.

3. May have a higher power consumption compared to simpler RFID antennas, depending on the specific application and usage.

If you are looking for a high-performance RFID antenna that meets FCC, ETS, and Laird standards and operates in a wide frequency range, the S9028PCLJ RFMAX S8658PLJ LHCP RFID Antenna FCC-ETSI Laird is a strong contender. Its LHCP design can enhance performance in challenging RF environments, making it suitable for various applications. However, its limited availability and higher cost compared to other RFID antennas should be considered. Ultimately, it is recommended to evaluate your specific RFID application requirements and budget before making a purchase decision.

Details:

This antenna achieves maximum efficiency and performance across the entire frequency band. Both vst and axial ratios are excellent allow the user to achieve maximum performance for an antenna of this type. White abs plastic. Extremely low vst and axial ratio.

Buy all 4 get 1 free. Weather and UV resistant radium. It is built with a pre-installed 96 inch 8 foot pigtail and reputing-male connector. An optional articulating mount allows either wall or mast mounting.

5 Bic gain with reception and transmission in the fcc: MHz 865-870mhz frequency bands. This unit is a left hand circularly polarized 10x10 inch panel operates at 8. Specs can be found online for free.

The antenna is housed in a heavy duty radium enclosure that can be directly wall mounted. Features low profile. Wide range of connector and cable options.

Equivalent to: Laird Ashcroft S9028PCLJ96rtn and impinge lhcp far field rfid antenna fcc etsi. Ra dome is ul 94-v2 rated for flammability.

part #: s9028pclj prices

• $46.50-$150.00

specifications voltageregula:

• brand: Laird Technologies
• model: Rfmax S9028pclj
• part type: Antenna
• country/region of manufacture: China
• device function: Rfid Antenna

Returns voltageregula:

• policy: no returns

General voltageregula:

• condition: Used
• business industrial > electrical test equipment > electronic components business industrial > voltage regulators electronic components
• in stock: Yes

Payments voltageregula:

• PayPal

Ratings:

1. Thank you 02-03-18
2. Great product 09-30-15
3. Outstanding service, thank you! 10-24-16
4. New, fits and works great, fast shipping, Thank you! 04-01-16
5. perfect item quick delivery. great communicator. 12-09-16

Seller voltageregula:

• zipcode: 33065
• city: Pompano Beach, Florida

Shipping voltageregula:

• handling: 2 days
• type: Flat
• cost: $10.0

Offer voltageregula:

• quantity: 4
• Started: April 28, 2018, 4:11 pm
• bids: 0
• best offer: true
• Sold: 0

Laird Technologies S9028PCLJ Is Similar To:

• 2.1mbps Btm431 Laird Technologies Bluetooth Mod 2.48ghz At Data Int Ant (46.2% similar) 1MBPS, at data, int ant price for each supply voltage min 3v supply voltage max 48GHZ, 1MBPS Bluetooth version Bluetooth...(August 21st, 2016)