POLULU POLD24V10F5 Pololu Step Voltage Regulator 5V 1A

( Brand: Polulu ), ( Manufacturer Part Number: POLD24V10F5 ), ( Part Type: Voltage Regulator )

Review POLULU Pololu 5v 1a Step Voltage Regulator D24v10f5

The Pololu D24V10F5 5V 1A Step-Down Voltage Regulator (Pold24v10f5) is a compact and efficient power management solution designed to provide a stable 5V output from an input voltage between 12V and 36V. This regulator is a member of Pololu's easy-to-use 24xx family, which features adjustable output voltage, input voltage dropout, and thermal protection.

The Pololu D24V10F5 is a step-down (buck) regulator, which means it can decrease the voltage from its input to its output. It can deliver up to 1 amp of continuous current, making it suitable for powering a variety of low-power devices. The regulator's minimum input voltage is 12V, while the maximum is 36V, allowing it to operate from a wide range of power sources.

One of the key features of the Pold24v10f5 is its adjustable output voltage. The output voltage can be set between 1.2V and 35V by adjusting an external potentiometer. This feature is particularly useful in applications where the input voltage varies or when a specific output voltage is required to power a specific device.

The regulator also features adjustable input voltage dropout, which is the minimum input voltage required to maintain the regulator's output voltage. By adjusting the dropout voltage, the regulator can operate more efficiently at light loads and can handle input voltage fluctuations with less output voltage drop.

The Pololu D24V10F5 includes thermal protection, which prevents the regulator from getting too hot. If the temperature of the regulator exceeds its maximum operating temperature, it will automatically reduce its output current until the temperature drops below the maximum threshold.

The Pold24v10f5 is a surface-mount device (SMD) with a small 4mm x 5mm footprint, making it easy to incorporate into a variety of projects. The regulator is available in a TO-220 package, which is a through-hole package that can be easily soldered to a printed circuit board (PCB).

In summary, the Pololu D24V10F5 5V 1A Step-Down Voltage Regulator (Pold24v10f5) is a versatile and efficient power management solution that can deliver a stable 5V output from a wide range of input voltages. Its adjustable output voltage, input voltage dropout, and thermal protection make it an ideal choice for a variety of applications, from low-power electronics to industrial equipment.

1. Wide Input Voltage Range: This step-down regulator can handle input voltages from 24V to 36V, making it suitable for a wide range of power sources.

2. High Efficiency: The Pold24V10F5 has an efficiency of up to 90%, which means less heat is produced and more power is delivered to the load.

3. Low Noise: It has a maximum output noise of 50mV, which is suitable for applications that require a clean power supply.

4. Small Size: The regulator is compact, measuring only 0.5 x 0.6 x 0.25 inches, making it easy to integrate into small electronics projects.

5. Protective Features: The regulator includes over-current protection, which prevents damage to the regulator if the current exceeds the specified limit.

1. Limited Output Current: The regulator can only deliver up to 1A of output current, which may not be sufficient for high-power applications.

2. Limited Input Voltage Step: The regulator can only reduce the input voltage by 1.25V at a time, which may not be suitable for applications that require a more precise voltage reduction.

3. Requires External Filter Capacitors: The regulator requires external filter capacitors to be connected to the input and output to eliminate noise and stabilize the voltage.

The Pold24V10F5 Pololu 5V 1A Step Voltage Regulator D24V10F5 Pololu is a good choice for small electronics projects that require a stable 5V power supply from a wide range of input voltages. Its high efficiency, low noise, and protective features make it a reliable option. However, its limited output current and input voltage step may not be suitable for high-power applications or applications that require a more precise voltage reduction.

If you are looking for a step-down regulator for small electronics projects, the Pold24V10F5 Pololu 5V 1A Step Voltage Regulator D24V10F5 Pololu is a good option. However, if you require a higher output current or a more precise voltage reduction, you may want to consider other options. It is always a good idea to carefully consider your specific application requirements before making a purchase.

Details:

1 prime spacing along the edge of board for compatibility with solder less breadboards, connectors, and other prototyping arrangements that use a 18mm typical dropout voltage step-down regulator is minimum amount by which input must exceed target output in order to ensure can be achieved. 7 prime this regulator offers typical efficiencies between 85 and 90 has a very low dropout, so it can be used with input voltage s as few hundred Millie volts above 5 v. For example, if a 5 v regulator has 1 dropout voltage , the input must be at least 6 to ensure output is full.

4 v to turn off the output and put board into a low-power state.

3 v, 5/6 9 or 12 v output depending on regulator version with 4 accuracy maximum current: 1 a typical efficiency of 80 to khz switching frequency when not in power-save mode 2 ms soft-start reduces in-rush current power-up 200 mu no-load quiescent integrated over-temperature and over-current shutoff small size. This output is also actively held low for the duration of regulator 2 ms soft-start period and while being disabled by shin input or over-temperature over-current fault conditions. 5 prime this could make it harder to filter out noise on the output caused by switching.

At 36 v in it will draw about 360 mu. 1 prime spacing, making this board compatible with standard solder less breadboards and pegboards. The compact. This product page applies to all five versions of the d24v10fx family.

In order to achieve a high efficiency at low loads, this regulator automatically goes into power-save mode where the switching frequency is reduced. Typical efficiency and output current the of a voltage regulator, defined as power out in, is an important measure its performance, especially when battery life or heat are concerns. 3 v, the d24v10f5 version outputs 5 d24v10f6 6 d24v10f9 9 and d24v10f12 12 v.

5 prime these regulators have a power-save mode that activates at light loads and low quiescent no load current draw, which make them well suited for applications are run from battery. The shin pin can be used to put board in a low-power state that reduces quiescent current approximately 10 20 per volt on vain, and pg power good output monitor of regulator voltage . The power good indicator, pg, is an open-drain output that drives low when regulator voltage falls below 80 or rises above 120 of its target.

In power-save mode, the switching frequency of regulator changes as necessary to minimize power loss. The output voltage , bout, is fixed and depends on regulator version: d24v10f3 version outputs There is a 100 k omega pull-up resistor between the shin pin and vain, so if you want to leave board permanently enabled, can be left disconnected. This family of switching regulators typically has an efficiency 80 to 93, though the actual in a given system depends on input voltage , output and current.

5mm using the regulator connections buck has five connections: power good pg. The pins have. The boards do not have reverse- voltage protection.

You can solder wires directly to the board or in either 5/1 straight male header strip right-angle that is included. The input voltage , vain, powers regulator.

The five connections are labeled on back side of PCB and arranged with. 7 prime d24v10f5 synchronous buck voltage regulator takes an input of up to 36 v and efficiently reduces it 5 while allowing for a maximum output current 1 prime grid.

The shin pin can be driven low under. The regulators feature short-circuit over-current protection, and thermal shutdown helps prevent damage from overheating.

specifications voltageregula:

• brand: Polulu
• mpn: Pold24v10f5
• part type: Voltage Regulator

General voltageregula:

• condition: New
• in stock: Yes
• business industrial > electrical test equipment > electronic components business industrial > voltage regulators electronic components

Ratings:

1. Great product as promised. 06-07-18
2. Awesome
3. Excellent, product as advertised, prompt delivery 07-09-18
4. Item arrived well packed and exactly as described - great experience. 07-12-18
5. Fast Shipping! 07-07-18

Seller voltageregula:

• zipcode: 80112
• city: Englewood, Colorado

Offer voltageregula:

• quantity: 6
• best offer: false
• Sold: 0
• Started: July 12, 2018, 10:11 pm
• bids: 0

Returns voltageregula:

• policy: no returns

Payments voltageregula:

• PayPal

Shipping voltageregula:

• handling: days
• type: Flat
• cost: $2.0