UNITRODE L296V Cross High Voltage Step Switching Regulator 1X NTE1681 Sip

( Brand: Unitrode ), ( Manufacturer Part Number: L296V ), ( Part Type: Voltage Regulator ), ( Conversion Direction: Step-down )

Review UNITRODE 1x Cross High Voltage Step Switching Regulator Sip

The NTE1681 1x Unitrode L296V Cross High Voltage Step Switching Regulator SIP is a powerful and versatile electronic component designed for voltage regulation and control applications. This device utilizes the L296V dual full-bridge driver IC, which is renowned for its ability to drive inductive loads, making it an ideal choice for motor control and power conversion applications.

The NTE1681 is a surface-mount device (SIP) that measures approximately 12.0mm x 13.0mm, making it compact and easy to integrate into various electronic systems. It operates on a wide input voltage range of 6V to 36V, making it suitable for use with a variety of power sources. The device features a high efficiency step-down switching regulator that can deliver output voltages as low as 1.2V, making it ideal for powering low-voltage devices such as LEDs, sensors, and microcontrollers.

The NTE1681 features adjustable output current limiting, which allows the user to set the maximum current output to prevent overloading of the device or the connected load. The device also has built-in over-temperature protection, which shuts down the regulator if the temperature exceeds a safe operating limit to prevent damage to the device.

The NTE1681 is designed to be easy to use, with a simple configuration process that requires only a few external components. It features a built-in enable/disable pin, which allows the user to turn the regulator on or off as needed. The device also has an enable/disable input that can be used to control the regulator via an external signal, making it suitable for use in applications where manual control or remote control is required.

Overall, the NTE1681 1x Unitrode L296V Cross High Voltage Step Switching Regulator SIP is a powerful and versatile electronic component that is well-suited for a wide range of voltage regulation and control applications. Its compact size, wide input voltage range, adjustable output current limiting, and built-in protection features make it an ideal choice for use in a variety of electronic systems, from small embedded devices to larger industrial control systems.

1. High voltage operation: This regulator can handle input voltages up to 50V, making it suitable for high voltage applications.

2. Efficient power conversion: The L296V uses a step-down switching regulator design, which is more efficient than linear regulators, especially for high current applications.

3. Wide output voltage range: The output voltage can be adjusted from 0.1V to the input voltage, allowing for a wide range of output voltages.

4. Ability to drive heavy loads: The L296V can deliver up to 2A of continuous output current, making it suitable for driving heavy loads.

5. Compact size: The SIP package is small and compact, making it easy to integrate into a circuit board.

1. Complexity: The L296V requires a microcontroller or external control circuit to adjust the output voltage and enable/disable the regulator, which can add complexity to the design.

2. Heat dissipation: The L296V generates heat during operation, and proper heat sinking may be necessary to ensure reliable operation at high currents.

3. No built-in protection circuitry: The L296V does not have built-in protection circuitry for overcurrent, overvoltage, or short circuit, so additional protection measures may be required.

The NTE1681 1x Unitrode L296V Cross High Voltage Step Switching Regulator SIP is a versatile and powerful regulator that can handle high input voltages and deliver high current outputs. However, its complexity and heat dissipation requirements may make it less suitable for some applications. If you have the necessary expertise and can address these issues, the L296V can be a great choice for high voltage, high current applications. If you are unsure or unsure of your ability to address the complexity and heat dissipation issues, consider using a simpler and more robust regulator with built-in protection circuitry.

If you are looking for a high voltage, high current regulator with a wide output voltage range, the NTE1681 1x Unitrode L296V Cross High Voltage Step Switching Regulator SIP is a good choice. However, make sure to address its complexity and heat dissipation requirements before using it in your design. If you are unsure or unsure of your ability to address these issues, consider using a simpler and more robust regulator with built-in protection circuitry.

Details:

1v - 40v switching frequency up to 200khz link data sheet. Listing is for 1x Unitrode L296V step down high voltage switching regulator cross to NTE1681 15 pin sip output: 4a 5.

part #: l296v price

• $10.95

specifications voltageregula:

• brand: Unitrode
• mpn: L296v
• part type: Voltage Regulator
• conversion direction: Step-down

Ratings:

1. Fast shipping - works perfect!!! 09-01-17
2. excellant fit. easy transaction! 09-06-17
3. Great, Pleasure doing with. 09-06-17
4. Thanks again! 11-03-17
5. Super fast payment, great buyer, thanks so much!!! 10-02-17

Shipping voltageregula:

• type: Flat
• cost: $0.0
• handling: 1 days

Returns voltageregula:

• paid by: Buyer
• details: Returns accepted for defective products only.
• time: 30 Days
• type: Money back or replacement buyers choice
• policy: returns accepted

Payments voltageregula:

• PayPal

Seller voltageregula:

• zipcode: 96067
• city: Mount Shasta, California

Offer voltageregula:

• bids: 0
• Started: November 11, 2017, 4:39 pm
• quantity: 5
• Sold: 0
• best offer: false

General voltageregula:

• business industrial > electrical test equipment > electronic components business industrial > voltage regulators electronic components
• condition: New
• in stock: Yes

Unitrode L296V Is Similar To:

• Pic611 Unitrode Dc To Converter And Switching Regulator Unit (35.2% similar) ...(March 28th, 2019)