ADAFRUIT 2465 Powerboost Charger Rechargeable Lipo Usb Boost 1000 5V 1A

( Brand: Adafruit ), ( Model: 2465 ), ( Part Type: Charger ), ( Device Function: Voltage Regulator ), ( Conversion Direction: Step-down ), ( Current Conversion: Dc To Dc ), ( Bundle Listing: No )

Review ADAFRUIT Powerboost 1000 Charger Rechargeable 5v Lipo Usb Boost 1a

The Adafruit PowerBoost 1000Charger is an impressive and versatile rechargeable 5V USB boost converter that's perfect for powering low-voltage devices from a variety of battery sources. This boost converter is specifically designed to work with 1-cell Lithium-polymer (LiPo) and Lithium-ion (LiIon) battery packs, making it an excellent choice for powering microcontrollers, sensors, and other small electronic devices.

The PowerBoost 1000Charger features a built-in 1A USB charger, allowing it to recharge the connected battery pack via micro-USB. It also includes an over-charge protection circuit to prevent battery damage from overcharging. The boost converter has an input voltage range of 2.8V to 6V, which means it can be charged from a wide range of battery sources, including solar panels and other low-voltage power sources.

One of the standout features of the PowerBoost 1000Charger is its adjustable output voltage. Using a potentiometer, you can adjust the output voltage between 4.5V and 5.5V, ensuring that your device receives the exact voltage it requires for optimal performance. This adjustability also allows the PowerBoost to be used with a variety of devices, from those that require a lower voltage to those that require a higher voltage.

The PowerBoost 1000Charger is also equipped with an onboard 3.3V linear voltage regulator, providing a constant 3.3V output for devices that require it. The regulator has a maximum current output of 500mA, making it suitable for powering a wide range of low-power devices.

The PowerBoost 1000Charger is compact, measuring just 20mm x 25mm x 6.5mm, and it comes with a set of mounting holes for easy integration into your projects. It is also fully compatible with the Arduino and Raspberry Pi platforms, and it includes a small jumper to enable or disable the charging function.

In summary, the Adafruit PowerBoost 1000Charger is a powerful and flexible boost converter that provides a reliable and safe power source for a wide range of low-voltage devices. Its adjustable output voltage, built-in charger, and onboard voltage regulator make it an ideal choice for makers and hobbyists looking to power their projects with ease.

1. Wide Input Voltage Range: The PowerBoost can be charged from any voltage between 5V and 25V, making it flexible to use with various power sources.

2. Charging and Power Boosting in One: The PowerBoost combines a charger and a booster circuit, eliminating the need for separate components.

3. Protective Features: It includes over-current, over-voltage, and short-circuit protection, ensuring the safety of the connected devices.

4. Efficient and Compact: With an efficiency of up to 93%, the PowerBoost delivers power efficiently and saves space in your projects.

5. Easy to Use: It has a simple circuit design and an on/off switch, making it easy to integrate into your projects.

1. Higher Cost: Compared to standalone chargers and boost converters, the PowerBoost might be more expensive due to its integrated design and additional features.

2. Limited Output Current: The PowerBoost can deliver a maximum continuous current of 1A, which might not be enough for power-hungry devices.

3. Weight and Size: While the PowerBoost is compact, it may be heavier and larger than separate chargers and boost converters due to its integrated design.

The Adafruit PowerBoost 1000 Charger is a versatile and convenient solution for charging and powering small devices, especially for beginner and intermediate makers. Its wide input voltage range, protective features, and compact size make it a valuable addition to many projects. However, its higher cost and limited output current might make it less suitable for high-power applications. If you're looking for a simple and reliable power solution for your projects, the PowerBoost is a great option. But, if you have specific power requirements, you might want to consider separate chargers and boost converters.

If you're a hobbyist or a maker looking for a convenient and reliable power solution for your projects, the Adafruit PowerBoost 1000 Charger is an excellent choice. Its wide input voltage range, protective features, and easy-to-use design will save you time and effort in your projects. Just keep in mind its higher cost and limited output current to ensure it meets your specific power needs.

Details:

Since the built-in battery charger has load-sharing, it will automatically switch over to usb power when available, instead of continuously charging draining. 2v, optimized for lipo lion battery usage onboard 1000ma charge-rate 'IOS' data resistors. The powerboost 1000c has at heart a tps61090 boost converter from ti. 2v is safe for all 5v-powered electronics like Arduino, raspberry pi, or beagle bone while preventing icky brown-outs during high current draw because of usb cable resistance.

The output to be 5. Synchronous operation means you can disconnect the output completely by connecting enable pin to ground. 5a peak limiting means you can get 1000ma from a Powerboost 1000 charger - rechargeable 5v lipo usb boost 1a 1000cproduct id: 2465 powerboost 1000c is the perfect power supply for your portable project.

0v so that theres a little bit of 'headroom' for long cables, high draw, the addition diode on output if you wish, etc. 7v lion li poly battery, and convert the battery output to 5. This is more efficient, and let's you charge-and-boost at the same time without any interruption on output so its fine for use as a ups un-interrupt able power supply. The charger circuitry is powered from a micro usb jack, and will recharge any 3.

Just make sure your battery can handle it. Theres two leds for monitoring the charge rate, a yellow one tells you its working, green lights up when done. Solder in the usb connector and you can plug any iPad, iPhone or iPod for 1000ma charge rate. 2v dc for running your 5v projects.

2v lion or li poly battery at 1000ma max rate. Each order comes with one fully assembled and tested PCB.

This will completely turn off the output2a internal switch With a built-in load-sharing battery charger circuit, you'll be able to keep your power-hungry project running even while recharging. Low battery indicator led lights up red when the voltage dips below 3.

This boost converter chip has some really nice extras such as low battery detection, 2a internal switch, synchronous conversion, excellent efficiency, and 700khz high-frequency operation. 2v instead of a straight-up 5. Full breakout for battery in, control pins and power out90 operating efficiency in most cases see data sheet graphs, low quiescent current: 5ma when enabled led is on, 20ua disabled Bart are off to make this even more useful, we stuck a smart load-sharing li poly charger on the other side. 7v li poly lion battery.

specifications voltageregula:

• brand: Adafruit
• model: 2465
• part type: Charger
• device function: Voltage Regulator
• conversion direction: Step-down
• current conversion: Dc To Dc
• bundle listing: No

Seller voltageregula:

• zipcode: 94108
• city: San Francisco, California

Offer voltageregula:

• best offer: true
• Started: May 29, 2018, 4:29 am
• Sold: 0
• quantity: 2
• bids: 0

Returns voltageregula:

• policy: no returns

Ratings:

1. Thank you for an easy, pleasant transaction. Excellent buyer.. 11-19-17
2. Great seller!!!!!! Fast shipping!!!! 05-26-18
3. Quick response and fast payment. Perfect! THANKS!! 11-16-17
4. Hope to deal with you again. Thank you. 11-16-17
5. Prompt Response, Quick Shipping, Excellent Seller 05-26-18

Shipping voltageregula:

• handling: 3 days
• type: Calculated
• cost: $3.5

General voltageregula:

• business industrial > electrical test equipment > electronic components business industrial > voltage regulators electronic components
• condition: New
• in stock: Yes

Payments voltageregula:

• PayPal

Adafruit 2465 Is Similar To:

• 1944 Adafruit Powerboost Charger Rechargeable 743724369342 (72.9% similar) ...(November 16th, 2017)
• Lysb01k5y5gqs-cmptraccs Adafruit Verter Usb 500ma 717520029533 (34.4% similar) 2v is safe for all 5V-POWERED electronics like Arduino, raspberry pi, or beagle bone while preventing icky brown-outs during high current draw because of usb cable resistance. 2MHZ high-frequency operation. Not suggested for iPad which really needs 1a charge rate. This will completely turn off the ...(July 13th, 2017)